8-pack To Do List
(mostly
pulled from Judy’s to do list)
# |
priority |
Thing to do |
Comments |
1 |
med –ish? |
processing loop -lost the fault reset
button -need sliders at bottom
for control variables -need to spec vacuum check |
priority to be
determined. Ron’s going to think about
how to include a vacuum check in the fast loop |
1 |
hihi |
summary of vac HV statuses |
Judy has the specs: if PS
is “working” (in use/needed) and HV<4, then need to flag error message on pack_main, llrfmain, and
modulator |
1 |
hihi |
archiver problems |
Bob and Janice will look
after the meeting |
2 |
hi |
epics display for plc vac analog display |
highest priority plc-based
panel |
2 |
hi |
AES support: -TR09 fails to find SIS
modules? -need addresses for SIS
modules &/or assess difficulty of supporting macnair
modules instead |
priority to be
determined. Ron’s going to think about
problems with tr09 and if implementing support for MacNair
modules is the best course of action |
2 |
hi |
another dio channel for mod on/off (the one currently implemented
resets) |
Judy will do and let
Janice know the channel number for the hardware folks |
2 |
hi |
save/restore |
mostly done, Judy has
implemented the highest priority stuff |
2 |
hi |
scp timeout |
Janice will email Terri
after the meeting |
3 |
med-hi |
epics display for plc vac analog mon display |
2nd priority
for plc-based panel |
3 |
med-hi |
sys:lst:pwr (lost power) doesn’t have
the fun pmax, pmin, pave
accoutrement, need these for diag button to its
right on the proc loop panel to work (once it gets sent the right pv) |
Ron will add this then change
(or delegate) the proc loop diag button |
3 |
med-hi |
sled ADC readouts are
purple. Not sure why. |
Janice will look into PHIT
on the floor issue and Judy will see what she finds |
4 |
med |
Sort through Cassel’s new touch panel printouts, mod database and
panels as needed |
Janice hopes it’s less
than 10 changes; Judy will look |
4 |
med |
finish PLC based displays |
follows item above |
4 |
med |
Summary PVs (database) for displays |
follows item above |
4 |
med |
alh – remind me again what it
is |
Janice will look with Judy
and try to decide what needs to be done. |
4 |
med |
We have infinite loop CRR
running to update anlg statuses in ta03. |
Ron will ask Nancy to have
ta03 update at 1 second interval for the next few weeks. |
4 |
med |
the dac_attenuators
in MW instead of volts |
Ron will look up the
equation and Elias is supposed to be thinking about it also. |
5 |
med-lo |
PLC checkout (need all the
displays for this) |
follows PLC items above |
6 |
lo |
Add all poly coef and smoo var to pack_adc_calib |
Judy has spec |
6 |
lo |
lost power >db panel – janice fixed, needs to be released. |
Janice will try to release |
6 |
lo |
FONT- detach their SISes from the NLCTA readout loop |
Ron says this is easy and
will look into it. |
7 |
lolo |
adc values are green when
negative (once commissioned, shouldn’t ever be negative) |
Ron offered that 0 might
have special meaning. |
8 |
lololo |
need to setup lopr and hopr for favorite
things to watch on stripcharts |
|
For
LLRF guys
Hardware Deadman
(from last time: Steve will test the hardware hook to RF chassis.)
Modify DIO module for mod on/off