Last modified: 01 Dec 2008
Last modified: 01 Dec 2008
Phase Detector Analysis for the 4 day period ending 1-DEC-2008 00:00:00.00.
This output is also available from http://www/grp/ad/mcc/Phase Detector Analysis.html
(jumps large rms tempco rms-T Vmed feedback)
LI00 PH_CID_0 0 0.0 0.0 0.00* 0.0 0.0
LI00 PH_714 0 0.0 0.0 0.00 0.0 0.0
LI01 PH_0_1 0 0.0 0.0 0.00* 0.0 0.0
LI01 PH_0_NDR 0 0.0 0.0 0.00* 0.0 0.0
LI02 PH_X6_S 0 0.0 0.0 0.00 0.0 0.0
LI02 PH_N-1_N 0 0.0 0.0 0.00 0.0 -0.5
LI03 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI04 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0
LI05 PH_N-1_N 10 90.0* 7.1* -0.13* 7.1 0.0
LI06 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0
LI07 PH_N-1_N 0 0.0 0.0 0.00* 0.0 -0.2
LI08 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0
LI09 PH_N-1_N 0 0.0 0.0 0.00* 0.0 14.0*
LI10 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI11 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI12 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI13 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI14 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0
LI15 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0
LI16 PH_N-1_N 0 0.1 0.1 0.00 0.1 0.0
LI17 PH_N-1_N 0 0.0 0.0 0.00* 0.0 29.3* 0.00*
LI18 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0 0.36*
LI19 PH_N-1_N 0 0.0 0.0 0.00 0.0 0.0 -2.42*
LI20 PH_N-1_N 0 0.0 0.0 0.00* 0.0 0.0
LI20 E+PDET 2 0.0 1.6 0.01 1.6 0.0
LI21 PH_N-1_N 35* 41.5* 5.3* 0.19 5.2 0.9
LI22 PH_N-1_N 0 0.4 1.1 0.15 0.5 -0.5
LI23 PH_N-1_N 0 0.2 0.6 0.02 0.6 -0.4
LI24 PH_N-1_N 0 0.3 0.7 0.09 0.4 0.6
LI25 PH_N-1_N 34* 33.3* 4.9* 0.16 4.8 0.0
LI26 PH_N-1_N 0 0.9 0.8 0.13 0.3 -0.2
LI27 PH_N-1_N 0 0.2 0.5 0.05 0.4 -1.6 0.84
LI28 PH_N-1_N 5 1.0 0.7 0.10 0.3 -4.5* 0.27*
LI29 PH_N-1_N 33* 9.7* 2.0 0.04 2.0 -4.3* -0.44*
LI30 PH_N-1_N 0 0.2 0.4 0.06 0.2 -9.7*
- Phase jumps are defined to be differences greater than 1 degrees.
Threshold for these jumps is 10 jumps per analysis period.
- Largest jump value is the 5th largest jump value.
Threshold for this is 2 degrees.
- Threshold for RMS deviation is 2 degrees.
- Threshold values for Tempco are 0 to 0.5 degrees/degree F (CA01:OUTSIDET).
- Vmed is the median voltage from the mixer.
Threshold absolute value is 3.142 volts.
- Feedback is correlation between ASTS:SBSTPHASs and PDETs (nominally 1).
Threshold values are unity +/- 0.2.
This page is maintained by Dave Steele