Date: Wed, 31 Mar 2004 10:47:50 -0800
From: Sheppard, John C.
Subject: FW: E166dimad.txt, E166output.txt

 Alexander, Attached are a dimadd deck and output for the E166 setup. 
I recollect that I had asked Rick to set up 5 m beta_x and beta_y at the 
center of the undulator. I also remembering looking at the files and thinking 
that I understood what was going on. Let me know if you have any questions. 
We need to modify some of the correctors and instruments in the deck 
but this should be good as far as the optics goes. 
Perhaps Achim will post this when he as an opportunity. 
Best regards, John
....
-----Original Message-----
From: Iverson, Richard H. 
Sent: Tuesday, December 17, 2002 2:25 PM
To: Sheppard, John C.; Pitthan, Rainer; Decker, Franz-Josef
Cc: Erickson, Roger A.; Woodley, Mark
Subject: E166dimad.txt, E166output.txt

Hi John and Rainer,

The text file inserted below is a solution for the E-166 FFTB optics.

At the marker named "E_166"(z=303.7meters), 
            BETAX=BETAY=10.0m, ALPHAX=APHAY=0.0.

All of the magnet strengths are comfortably below what the power supplies 
actually put out.

cheers,
Rick Iverson
---------------------------------------------------------------------