Abstracts |
A.R. Franck, R.W. Goodwin, P.A. Kasley, M.F. Shea
A remote data acquisition chassis, called a HOTLink Rack Monitor, HRM, has been developed for use in the Fermilab control system. This chassis provides for 64 analog input channels, 8 analog output channels, and 8 bytes of digital I/O. The interface to the host VMEbus crate is by way of a 320 MHz HOTLink serial connection to a PMC mezzanine module. With no processor intervention, all data sources in the remote chassis are read at 100 5sec intervals, timestamped, and stored in a 2 MB circular buffer on the PMC module. In operation, the memory always contains the most recent 16k samples of 10 kHz data from all 64 analog input channels. An expansion module that resides in the HRM chassis records snapshot data for 8 analog channels, each channel consisting of up to 16k readings, digitized at rates up to 10 MHz. Snapshot data is also returned and stored in buffers on the PMC module. Because the HRM presents a memory-mapped interface to the host, it is independent of the operating system and may be used in any system and may be used in any system that supports PMC mezzanine modules.
{*} HOTLink is a registered trademark of Cypress Semiconductor Corporation.
{**} Fermilab is Operated by Universities Research Association Inc. under Contract No. DE-AC02-76CH03000 with the United States Department of Energy.
eCONF
C011127
ePROCEEDINGS
COMMITTEES
PARTICIPANTS
PROGRAM
SUMMARY
ICALEPCS 2001
eCONF
|
||
Last updated: September 13, 2002 Website Problem? Contact Technical Publications |