gdb.info: Register Packet Format
Go forward to Examples
Go backward to General Query Packets
Go up to Remote Protocol
Go to the top op gdb
Register Packet Format
The following `g'/`G' packets have previously been defined. In the
below, some thirty-two bit registers are transferred as sixty-four
bits. Those registers should be zero/sign extended (which?) to fill
the space allocated. Register bytes are transfered in target byte
order. The two nibbles within a register byte are transfered
most-significant - least-significant.
All registers are transfered as thirty-two bit quantities in the
order: 32 general-purpose; sr; lo; hi; bad; cause; pc; 32
floating-point registers; fsr; fir; fp.
All registers are transfered as sixty-four bit quantities
(including thirty-two bit registers such as `sr'). The ordering
is the same as `MIPS32'.
Created Mon Nov 8 17:42:41 2004 on tillpc with info_to_html version 0.9.6.