Go to the previous, next section.

Basic Editing Commands

We now give the basics of how to enter text, make corrections, and save the text in a file. If this material is new to you, you might learn it more easily by running the Emacs learn-by-doing tutorial. To use the tutorial, run Emacs and type Control-h t (help-with-tutorial).

To clear the screen and redisplay, type C-l (recenter).

Inserting Text

To insert printing characters into the text you are editing, just type them. This inserts the characters you type into the buffer at the cursor (that is, at point; see section Point). The cursor moves forward, and any text after the cursor moves forward too. If the text in the buffer is `FOOBAR', with the cursor before the `B', then if you type XX, you get `FOOXXBAR', with the cursor still before the `B'.

To delete text you have just inserted, use DEL. DEL deletes the character before the cursor (not the one that the cursor is on top of or under; that is the character after the cursor). The cursor and all characters after it move backwards. Therefore, if you type a printing character and then type DEL, they cancel out.

To end a line and start typing a new one, type RET. This inserts a newline character in the buffer. If point is in the middle of a line, RET splits the line. Typing DEL when the cursor is at the beginning of a line deletes the preceding newline, thus joining the line with the preceding line.

Emacs can split lines automatically when they become too long, if you turn on a special minor mode called Auto Fill mode. See section Filling Text, for how to use Auto Fill mode.

If you prefer to have text characters replace (overwrite) existing text rather than shove it to the right, you can enable Overwrite mode, a minor mode. See section Minor Modes.

Direct insertion works for printing characters and SPC, but other characters act as editing commands and do not insert themselves. If you need to insert a control character or a character whose code is above 200 octal, you must quote it by typing the character Control-q (quoted-insert) first. (This character's name is normally written C-q for short.) There are two ways to use C-q:

A numeric argument to C-q specifies how many copies of the quoted character should be inserted (see section Numeric Arguments).

Customization information: DEL in most modes runs the command delete-backward-char; RET runs the command newline, and self-inserting printing characters run the command self-insert, which inserts whatever character was typed to invoke it. Some major modes rebind DEL to other commands.

Changing the Location of Point

To do more than insert characters, you have to know how to move point (see section Point). The simplest way to do this is with arrow keys, or by clicking the left mouse button where you want to move to.

There are also control and meta characters for cursor motion. Some are equivalent to the arrow keys (these date back to the days before terminals had arrow keys, and are usable on terminals which don't have them). Others do more sophisticated things.

C-a
Move to the beginning of the line (beginning-of-line).
C-e
Move to the end of the line (end-of-line).
C-f
Move forward one character (forward-char).
C-b
Move backward one character (backward-char).
M-f
Move forward one word (forward-word).
M-b
Move backward one word (backward-word).
C-n
Move down one line, vertically (next-line). This command attempts to keep the horizontal position unchanged, so if you start in the middle of one line, you end in the middle of the next. When on the last line of text, C-n creates a new line and moves onto it.
C-p
Move up one line, vertically (previous-line).
M-r
Move point to left margin, vertically centered in the window (move-to-window-line). Text does not move on the screen.

A numeric argument says which screen line to place point on. It counts screen lines down from the top of the window (zero for the top line). A negative argument counts lines from the bottom (-1 for the bottom line).

M-<
Move to the top of the buffer (beginning-of-buffer). With numeric argument n, move to n/10 of the way from the top. See section Numeric Arguments, for more information on numeric arguments.
M->
Move to the end of the buffer (end-of-buffer).
M-x goto-char
Read a number n and move point to character number n. Position 1 is the beginning of the buffer.
M-x goto-line
Read a number n and move point to line number n. Line 1 is the beginning of the buffer.
C-x C-n
Use the current column of point as the semipermanent goal column for C-n and C-p (set-goal-column). Henceforth, those commands always move to this column in each line moved into, or as close as possible given the contents of the line. This goal column remains in effect until canceled.
C-u C-x C-n
Cancel the goal column. Henceforth, C-n and C-p once again try to stick to a fixed horizontal position, as usual.

If you set the variable track-eol to a non-nil value, then C-n and C-p when at the end of the starting line move to the end of another line. Normally, track-eol is nil. See section Variables, for how to set variables such as track-eol.

Normally, C-n on the last line of a buffer appends a newline to it. If the variable next-line-add-newlines is nil, then C-n gets an error instead (like C-p on the first line).

Erasing Text

DEL
Delete the character before point (delete-backward-char).
C-d
Delete the character after point (delete-char).
C-k
Kill to the end of the line (kill-line).
M-d
Kill forward to the end of the next word (kill-word).
M-DEL
Kill back to the beginning of the previous word (backward-kill-word).

You already know about the DEL key which deletes the character before point (that is, before the cursor). Another key, Control-d (C-d for short), deletes the character after point (that is, the character that the cursor is on). This shifts the rest of the text on the line to the left. If you type C-d at the end of a line, it joins together that line and the next line.

To erase a larger amount of text, use the C-k key, which kills a line at a time. If you type C-k at the beginning or middle of a line, it kills all the text up to the end of the line. If you type C-k at the end of a line, it joins that line and the next line.

See section Deletion and Killing, for more flexible ways of killing text.

Undoing Changes

You can undo all the recent changes in the buffer text, up to a certain point. Each buffer records changes individually, and the undo command always applies to the current buffer. Usually each editing command makes a separate entry in the undo records, but some commands such as query-replace make many entries, and very simple commands such as self-inserting characters are often grouped to make undoing less tedious.

C-x u
Undo one batch of changes--usually, one command worth (undo).
C-_
The same.

The command C-x u or C-_ is how you undo. The first time you give this command, it undoes the last change. Point moves back to where it was before the command that made the change.

Consecutive repetitions of C-_ or C-x u undo earlier and earlier changes, back to the limit of the undo information available. If all recorded changes have already been undone, the undo command prints an error message and does nothing.

Any command other than an undo command breaks the sequence of undo commands. Starting from that moment, the previous undo commands become ordinary changes that you can undo. Thus, to redo changes you have undone, type C-f or any other command that will harmlessly break the sequence of undoing, then type more undo commands.

If you notice that a buffer has been modified accidentally, the easiest way to recover is to type C-_ repeatedly until the stars disappear from the front of the mode line. At this time, all the modifications you made have been canceled. Whenever an undo command makes the stars disappear from the mode line, it means that the buffer contents are the same as they were when the file was last read in or saved.

If you do not remember whether you changed the buffer deliberately, type C-_ once. When you see the last change you made undone, you will see whether it was an intentional change. If it was an accident, leave it undone. If it was deliberate, redo the change as described above.

Not all buffers record undo information. Buffers whose names start with spaces don't; these buffers are used internally by Emacs and its extensions to hold text that users don't normally look at or edit.

You cannot undo mere cursor motion; only changes in the buffer contents save undo information. However, some cursor motion commands set the mark, so if you use these commands from time to time, you can move back to the neighborhoods you have moved through by popping the mark ring (see section The Mark Ring).

When the undo information for a buffer becomes too large, Emacs discards the oldest undo information from time to time (during garbage collection). You can specify how much undo information to keep by setting two variables: undo-limit and undo-strong-limit. Their values are expressed in units of bytes of space.

The variable undo-limit sets a soft limit: Emacs keeps undo data for enough commands to reach this size, and perhaps exceed it, but does not keep data for any earlier commands beyond that. Its default value is 20000. The variable undo-strong-limit sets a stricter limit: the command which pushes the size past this amount is itself forgotten. Its default value is 30000.

Regardless of the values of those variables, the most recent change is never discarded, so there is no danger that garbage collection occurring right after an unintentional large change might prevent you from undoing it.

The reason the undo command has two keys, C-x u and C-_, set up to run it is that it is worthy of a single-character key, but on some keyboards it is not obvious how to type C-_. C-x u is an alternative you can type straightforwardly on any terminal.

Files

The commands described above are sufficient for creating and altering text in an Emacs buffer; the more advanced Emacs commands just make things easier. But to keep any text permanently you must put it in a file. Files are named units of text which are stored by the operating system for you to retrieve later by name. To look at or use the contents of a file in any way, including editing the file with Emacs, you must specify the file name.

Consider a file named `/usr/rms/foo.c'. In Emacs, to begin editing this file, type

C-x C-f /usr/rms/foo.c RET

Here the file name is given as an argument to the command C-x C-f (find-file). That command uses the minibuffer to read the argument, and you type RET to terminate the argument (see section The Minibuffer).

Emacs obeys the command by visiting the file: creating a buffer, copying the contents of the file into the buffer, and then displaying the buffer for you to edit. If you alter the text, you can save the new text in the file by typing C-x C-s (save-buffer). This makes the changes permanent by copying the altered buffer contents back into the file `/usr/rms/foo.c'. Until you save, the changes exist only inside Emacs, and the file `foo.c' is unaltered.

To create a file, just visit the file with C-x C-f as if it already existed. This creates an empty buffer in which you can insert the text you want to put in the file. The file is actually created when you save this buffer with C-x C-s.

Of course, there is a lot more to learn about using files. See section File Handling.

Help

If you forget what a key does, you can find out with the Help character, which is C-h. Type C-h k followed by the key you want to know about; for example, C-h k C-n tells you all about what C-n does. C-h is a prefix key; C-h k is just one of its subcommands (the command describe-key). The other subcommands of C-h provide different kinds of help. Type C-h twice to get a description of all the help facilities. See section Help.

Blank Lines

Here are special commands and techniques for putting in and taking out blank lines.

C-o
Insert one or more blank lines after the cursor (open-line).
C-x C-o
Delete all but one of many consecutive blank lines (delete-blank-lines).

When you want to insert a new line of text before an existing line, you can do it by typing the new line of text, followed by RET. However, it may be easier to see what you are doing if you first make a blank line and then insert the desired text into it. This is easy to do using the key C-o (open-line), which inserts a newline after point but leaves point in front of the newline. After C-o, type the text for the new line. C-o F O O has the same effect as F O O RET, except for the final location of point.

You can make several blank lines by typing C-o several times, or by giving it a numeric argument to tell it how many blank lines to make. See section Numeric Arguments, for how. If you have a fill prefix, then C-o command inserts the fill prefix on the new line, when you use it at the beginning of a line. See section The Fill Prefix.

The easy way to get rid of extra blank lines is with the command C-x C-o (delete-blank-lines). C-x C-o in a run of several blank lines deletes all but one of them. C-x C-o on a solitary blank line deletes that blank line. When point is on a nonblank line, C-x C-o deletes any blank lines following that nonblank line.

Continuation Lines

If you add too many characters to one line without breaking it with RET, the line will grow to occupy two (or more) lines on the screen, with a `\' at the extreme right margin of all but the last of them. The `\' says that the following screen line is not really a distinct line in the text, but just the continuation of a line too long to fit the screen. Continuation is also called line wrapping.

Sometimes it is nice to have Emacs insert newlines automatically when a line gets too long. Continuation on the screen does not do that. Use Auto Fill mode (see section Filling Text) if that's what you want.

As an alternative to continuation, Emacs can display long lines by truncation. This means that all the characters that do not fit in the width of the screen or window do not appear at all. They remain in the buffer, temporarily invisible. `$' is used in the last column instead of `\' to inform you that truncation is in effect.

Truncation instead of continuation happens whenever horizontal scrolling is in use, and optionally in all side-by-side windows (see section Multiple Windows). You can enable truncation for a particular buffer by setting the variable truncate-lines to non-nil in that buffer. (See section Variables.) Altering the value of truncate-lines makes it local to the current buffer; until that time, the default value is in effect. The default is initially nil. See section Local Variables.

See section Variables Controlling Display, for additional variables that affect how text is displayed.

Cursor Position Information

Here are commands to get information about the size and position of parts of the buffer, and to count lines.

M-x what-page
Print page number of point, and line number within page.
M-x what-line
Print line number of point in the buffer.
M-x line-number-mode
Toggle automatic display of current line number.
M-=
Print number of lines in the current region (count-lines-region).
C-x =
Print character code of character after point, character position of point, and column of point (what-cursor-position).

There are two commands for printing the current line number. M-x what-line computes the current line number and displays it in the echo area. M-x line-number-mode enables display of the current line number in the mode line; once you turn this on, the number updates as you move point, so it remains valid all the time. See section The Mode Line.

Line numbers count from one at the beginning of the buffer. To go to a given line by number, use M-x goto-line; it prompts you for the line number.

By contrast, M-x what-page counts pages from the beginning of the file, and counts lines within the page, printing both numbers. See section Pages.

While on this subject, we might as well mention M-= (count-lines-region), which prints the number of lines in the region (see section The Mark and the Region). See section Pages, for the command C-x l which counts the lines in the current page.

The command C-x = (what-cursor-position) can be used to find out the column that the cursor is in, and other miscellaneous information about point. It prints a line in the echo area that looks like this:

Char: x (0170)  point=65986 of 563027(12%)  x=44

(In fact, this is the output produced when point is before the `x=44' in the example.)

The two values after `Char:' describe the character that follows point, first by showing it and second by giving its octal character code.

`point=' is followed by the position of point expressed as a character count. The front of the buffer counts as position 1, one character later as 2, and so on. The next, larger number is the total number of characters in the buffer. Afterward in parentheses comes the position expressed as a percentage of the total size.

`x=' is followed by the horizontal position of point, in columns from the left edge of the window.

If the buffer has been narrowed, making some of the text at the beginning and the end temporarily inaccessible, C-x = prints additional text describing the currently accessible range. For example, it might display this:

Char: x (0170)  point=65986 of 563025(12%) <65102 - 68533>  x=44

where the two extra numbers give the smallest and largest character position that point is allowed to assume. The characters between those two positions are the accessible ones. See section Narrowing.

If point is at the end of the buffer (or the end of the accessible part), C-x = omits any description of the character after point. The output looks like this:

point=563026 of 563025(100%)  x=0

Numeric Arguments

Any Emacs command can be given a numeric argument (also called a prefix argument). Some commands interpret the argument as a repetition count. For example, C-f with an argument of ten moves forward ten characters instead of one. With these commands, no argument is equivalent to an argument of one. Negative arguments tell most such commands to move or act in the opposite direction.

If your terminal keyboard has a META key, the easiest way to specify a numeric argument is to type digits and/or a minus sign while holding down the the META key. For example,

M-5 C-n
would move down five lines. The characters Meta-1, Meta-2, and so on, as well as Meta--, do this because they are keys bound to commands (digit-argument and negative-argument) that are defined to contribute to an argument for the next command.

Another way of specifying an argument is to use the C-u (universal-argument) command followed by the digits of the argument. With C-u, you can type the argument digits without holding down modifier keys; C-u works on all terminals. To type a negative argument, type a minus sign after C-u. Just a minus sign without digits normally means -1.

C-u followed by a character which is neither a digit nor a minus sign has the special meaning of "multiply by four". It multiplies the argument for the next command by four. C-u twice multiplies it by sixteen. Thus, C-u C-u C-f moves forward sixteen characters. This is a good way to move forward "fast", since it moves about 1/5 of a line in the usual size screen. Other useful combinations are C-u C-n, C-u C-u C-n (move down a good fraction of a screen), C-u C-u C-o (make "a lot" of blank lines), and C-u C-k (kill four lines).

Some commands care only about whether there is an argument, and not about its value. For example, the command M-q (fill-paragraph) with no argument fills text; with an argument, it justifies the text as well. (See section Filling Text, for more information on M-q.) Plain C-u is a handy way of providing an argument for such commands.

Some commands use the value of the argument as a repeat count, but do something peculiar when there is no argument. For example, the command C-k (kill-line) with argument n kills n lines, including their terminating newlines. But C-k with no argument is special: it kills the text up to the next newline, or, if point is right at the end of the line, it kills the newline itself. Thus, two C-k commands with no arguments can kill a nonblank line, just like C-k with an argument of one. (See section Deletion and Killing, for more information on C-k.)

A few commands treat a plain C-u differently from an ordinary argument. A few others may treat an argument of just a minus sign differently from an argument of -1. These unusual cases are described when they come up; they are always for reasons of convenience of use of the individual command.

You can use a numeric argument to insert multiple copies of a character. This is straightforward unless the character is a digit; for example, C-u 6 4 a inserts 64 copies of the character `a'. But this does not work for inserting digits; C-u 6 4 1 specifies an argument of 641, rather than inserting anything. To separate the digit to insert from the argument, type another C-u; for example, C-u 6 4 C-u 1 does insert 64 copies of the character `1'.

We use the term "prefix argument" as well as "numeric argument" to emphasize that you type the argument before the command, and to distinguish these arguments from minibuffer arguments that come after the command.

Go to the previous, next section.