Field Uniformity Measurements.
These measurements are made using the program HAR. The magnets are first cycled 3 times between 100A and 950A. The magnets are then ramped to current of 650A. Measurements are then made of the Integral Bdl at 3 different measuring coil locations.

a) Measuring coil centered along magnet length.
b) Measuring coil located 1 inch inside of center.
c) Measuring coil located 1 inch outside of center.
These measurements are then summarized in 3 files:
a) HARLOG.RU#
Contains the raw measurements made with the rotating coil. Both the reference magnet and the magnet under test are included.
b) HARDAT.RU#
Is a summary table of calculated results using the data from HARLOG.RU#. This includes X-Cross Calibrated Integrated Voltages, Ratio's to Reference, Integral Bdl, and Transfer Function.
c) HARPLT.RU#
Is a summary table specifically used for a plotting routine used to examine the data after a measurement is complete. This is just a compressed summary of the data found in HARDAT.RU#. It contains no headers, titles, or explanations of what the data is.