DCZ Full System Commissioning Software tasks
============================================

1) TSF tick 3 bits     (Rainer)  
   Many monitoring needs for TSF->BLT/ZPD transmission and algorithm monitoring.
   Only change for DCZ. 

2) Parasite BLT  (Nicolas)  
   What need to be done for TC->Digi to look at parasite BLT data offline ? 
   (when PTD in parasitic mode, do we need to look at the data ?) 

3) Specify the ZPD/GLT DCZ configuration exactly for the initial DCZ run (Su Dong)
   The new GLT object names and initial set of GLT lines
   (do we need new GLT counting schemes for new GLT objects ?)   

4) Trig Config upgrade for DCZ   (Rainer) 
   Introduce a layer translating TrgConfig objects -> GLT hardware objects
   detector version flags

5) DCT config objects moving to DB  (????)
   All ZPD config objects
   Residual TSF config objects (besides LUT)
   BLT masks
   (Will not do PTD ?) 

6) Config BLT differently for default and parasitic ?      (????)  
   (DAQ latency could be different between old and new). 

7) ZPD FEX full system test   (Stephen/Eunil)  

8) Full system interface tests (Xuedong)  
   There is a lot of work here for the many system tests !  
 
9) BLT teststand code   (Nicolas) 
   Memory test, algorithm/DAQ tests 

10) Complete GLT teststand setup  (Valerie)
    Board memory tests, algorithm/DAQ tests 
 
11) DCZ/DCT online setup cleanup   (????) 
    We have various soft links eg. June2003 etc. Is this setup 
    adequate for full system and teststand operations ? What we
    might do differently if DCT config obj   

12) Online release build for DCZ full system run    (Jamie ?) 

13) L3 compatibility with DCZ    (will check with L3 group)
    When DCZ drive BaBar L1, L3 also switch to use new TSF data ? 
    Test complete compatibility of L3 with new TSF data.

14) BLT/PTD L1Sim upgrade debugging   (Eric)  

15) GLT sim code  (Valerie)

16) Simulation release build  (Eric)  

17) Monitoring:  
      DCZ fastmon/Oprmon:  
        TSF old new detailed comparison  (Jamie) 
        DCZ effficiency/resoultion vs L3 tracks   (Kris ?) 
        Parasite BLT     (Nicolas)                    
        + surely a few other things..        
      Wire event display (Nicolas)  
        Verify TSF,ZPD displays for various flavors of TCs
        Add BLT display  

18) Trigger MC production for config studies  (Olya) 
    Before running the MC jobs, two checks are being performed:  
    a) Jamie just looked at TSF/DCT with new DCH sim changes and we have  
       a recommended setup for the our MC. 
    b) Needs to see Paul's study of EMT efficiency sim still.  (Paul J).