ZPD Printed Circuit Board Documentation

• The Cartoon Guide to the ZPD
  This document shows the overall picture of the ZPD PCB.
• Block diagram
  This diagram might be the easiest place to get an overview of the ZPD dataflow, although since it isn’t the actual schematics, it runs the risk of getting out of sync with what is really implemented.
• Signal table
  This spreadsheet is the working document which was used for creating the schematic. It lists all the signals on the ZPD and where they are connected.
• Approximate front panel layout
• Schematics:
  

  Prototype	Production
  Schematics (840k)	Schematics (880k)
  Top Layer [Silkscreen]	Top Layer
  Bottom Layer [Silkscreen]	Bottom Layer
  Internal Layers: 2 3 4 5 6 7 8 9 10 11	---
  Signal Table	---
  Netlist	Netlist

• Human Readable Netlist (prototype)
  This version has been reformatted to be more human friendly.
• Connector and FPGA pinouts
  
  • Backplane connectors (J1, J2, and J3)
  • Decoder/Driver (Xilinx Virtex II XC2V3000-1152 FPGA)
  • Finder/Fitter (Xilinx Virtex II XC2V4000-1152 FPGA)
  • Decision Module (Xilinx Virtex II XC2V1000-896 FPGA)