How to get a strip graph of beam currents for the LER & HER
===========================================================

1) setenv HOST_ARCH solaris
2) source /nfs/bbr-srv01/u1/babar/boot/apps/babar.login/EpicsSetup
3) StripTool

You will then be presented by a new window appearing on the 
screen titled : Strip Dialog

In the top left of this gui you will see a text entry box labeled 
"Signal Connect". In the box type the following:

CEN:PEP:HER:I 

Then press the button below labeled connect. Another window will 
appear called "StripGraph". After a second or so on the left hand 
side of this plot you will see a blue line start o appear.
Repeat the above except enter the following in the text entry box:

CEN:PEP:LER:I 

How To Alter the Plot
=====================

In the StripDialog window the right hand side is for controlling the 
output plotting. Click on the Modify buttons for the CEN:PEP:HER:I 
labeled line and change the Min & Max to 0 & 9 respectively. Repeat 
for the CEN:PEP:LER:I line. This is a good starting point though to 
gain greater accuracy you can alter these scales.