EMT Tasks                                     24/07/04
=========                                     ========
o Set up an L1EmtDataK package for simulation in CM2.
o Set up three monitoring tasks in L1TMon for general
  runs, namely
  - EMC-EMT check: needs EMC waveforms written out from
    the EMC ROMs (Matt Weaver) and code to check against
    the EMT tower sums (also Matt Weaver).
  - EMT internal check: compare inputs to outputs. This
    can be taken from L1EmtOep/L1EmtModelCheckApp
  - EMT-GLT check: compare EMT out to GLT in. This can be
    taken from L1EmtOep/L1EmtGltCheckApp
o Data/MC threshold and efficiency comparisons.
o Online improvements, namely
  - G-link data reduction
  - FEX speed improvement and 
  - Output TC size reduction.
  The first can be done by reducing the bits set in the Fx
  data. The other two can be done by only allowing data output
  for every Nth event, i.e. FEX suppression. The code to
  do this exists, but needs to be controllable through the
  configuration.
o Downstream offline effects of FEX suppression. Correct any
  efficiencies. monitoring, checking programs, etc. Check for
  problems with the L1EmtGltDigi missing in the event (which
  indicates FEX suppression).