Last modified: 28 October 2002
Highlights, Thumbnails, Descriptions
Highlights
Picture of rear endplate near completion of drilling. Spot drilling for grounding posts. Forward endplate machining and inspection photographs here and here. A picture of the test drilling plate can be found here. Also, other endplate machining pictures are here, here, here, and here
Pictures of beryllium section of the inner cylinder are here, here, here, and here
Pictures of the first wire installed in the DCH at 4pm PDT on August 18 are here, here, and here.
Final wires installed on November 28 at 6pm PST, with photographs here, here, here, here, here, and here.
Thumbnails
 babar1.jpg 474.65 Kb |
 babar2.jpg 332.22 Kb |
 babar3.jpg 422.53 Kb |
 babar4.jpg 382.91 Kb |
 babar5.jpg 370.20 Kb |
 babar6.jpg 473.92 Kb |
 img001r.jpg 711.09 Kb |
 img002.jpg 350.76 Kb |
 img003.jpg 815.85 Kb |
 img004r.jpg 613.45 Kb |
 img005r.jpg 780.63 Kb |
 img006.jpg 375.80 Kb |
 img007r.jpg 883.98 Kb |
 img008r.jpg 652.47 Kb |
 img009r.jpg 638.41 Kb |
 img010r.jpg 593.96 Kb |
 img011r.jpg 822.55 Kb |
 img012r.jpg 764.06 Kb |
 img013a.jpg 294.35 Kb |
 img013b.jpg 303.67 Kb |
 Snap01.jpg 165.44 Kb |
 Snap02.jpg 148.69 Kb |
 Snap03.jpg 163.71 Kb |
 Snap04.jpg 146.95 Kb |
 Snap05.jpg 169.75 Kb |
 Snap06.jpg 172.20 Kb |
 Snap07.jpg 184.50 Kb |
 Snap08.jpg 183.12 Kb |
 Snap09.jpg 153.69 Kb |
 Snap10.jpg 128.78 Kb |
Descriptions
- Photo 1: Nando Ferroni and Jonathan Dorfan surveying wire transport robots in TRIUMF clean room
- Photo 2: Stringer training with mockup at TRIUMF
- Photo 3: Richard Fernholz, Jonathan Dorfan, Robert Henderson discussing stringing procedures in front of robots at TRIUMF
- Photo 4: Mauro Morganti and Andrea Gaddi in front of chamber after test installation of outer cylinder
- Photo 5: Magnet coil for tension measurement
- Photo 6: Changguo Lu surveying tension measuring magnets
- Photo 7: Endplate test sector with installed feedthroughs and extraction tooling
- Photo 8: Test insertion of chamber structure between transport robots
- Photo 9: Richard Fernholz, Mauro Morandin, and Robert Henderson surveying installed chamber structure
- Photo 10: Andrea Gaddi and Mauro Morganti test installing second outer cylinder panel, with full tension load on endplates
- Photo 11: Chris Hearty and Mike Kelsey applying tension load to endplates
- Photo 12: Software engineers Sandra Santi and Roberto with Silvio Morganti testing robot operations
- Photo 13: Closeup of robot arm with magnetic gripper
- Photo 14: TRIUMF clean room with assembly fixture, installed chamber structure, and wire transport robots
- Photo 15: Robert Henderson and Richard Fernholz making a test hoist of mobile assembly fixture from top of fixed frame
- Photo 16: Closeup of Robert Henderson and Richard Fernholz hoisting mobile assembly frame
- Photo 17: TRIUMF physicist crew on top of fixed assembly fram
- Photo 18: Richard Fernholz with side view of partially hoisted mobile frame
- Photo 19: Mike Kelsey inserting central shaft into assembled chamber endplates and inner cylinder
- Photo 20: Test hoist of chamber structure in mobile assembly frame
- Photo 21: Closeup of spiders, tension rods, cables, and measurement equipment for endplate deflection test
- Photo 22: Mike Kelsey taking deflection measurement on endplate
- Photo 23: Physicist and stringer crew after completion of stringing at TRIUMF
- Photo 24: Day crew after completion of last shift on November 28
- Photo 25: Installation of final wire by evening crew on November 28
- Photo 26: After completion of final wire insertion on November 28
- Photo 27: View of completed wire field
- Photo 26: Start of installation of final wire by evening crew on November 28
For comments, questions or changes to this page contact David MacFarlane 