BaBar Drift Chamber
Environmental Sensors
How to Start-up the EPICS Panel ?
The very non official help page
(updated May 3rd 1999)
Normally you have to apply the scripts written by Jim Olsen to start-up
the EPICS stuffs of BaBar, so contact Jim or read the instructions
in the
BaBar Control Room, to do that.
OR you can use my non official scripts :
First of all to have the Panels displayed check you have properly defined
you display
(setenv DISPLAY ...) ! Then copy from my Unix account at SLAC the 2
files :
- /afs/slac.stanford.edu/u/ec/tisserav/start_dch
- /afs/slac.stanford.edu/u/ec/tisserav/run_epics
BEWARE of the fact that those 2 programs could change
without prior advertising !!!
Then just launch the Main EPICS Panel from your main directory (where
you have copied the 2 files)
with a "source start_dch" command. Then follow the instructions.
For
any questions you can contact me : Vincent.Tisserand@lapp.in2p3.fr
(first
try) or
Jim
Olsen or Mauro Morandin
(second try) or Fulvio
Galeazzi and
Chris
Brown.
|
