After powering on the crates, it is important to make sure each IOC is working after a couple minutes. Use the DM screens or another UNIX side monitor to check the IOCs and their monitors. If they are not working, use telnet bbr-tty1 <port number> where the port number is 2000 + 100 * the port. Some garbage normally appears on the screen. Wait for it to clear up. Then press a return or so until you see [VxWorks Boot]:. At the prompt, enter @. This should procede to boot the IOC. To exit the terminal session, press ^] and type quit at the telnet> prompt.
For the control room, execute the following on any terminals you plan to use:
cd /nfs/bbr-srv01/u1/babar/boot/apps/cen-mon source /nfs/bbr-srv01/u1/babar/epics/devel/R3.12.2-LBL.6.4/site/epicsSetup /nfs/bbr-srv01/u1/babar/cmlog/bin/solaris/cmlogClientD & /nfs/bbr-srv01/u1/babar/epics/R3.13.0.beta11/base/bin/solaris/caRepeater &and execute the following on bbr-srv01:
/nfs/bbr-srv01/u1/babar/cmlog/bin/solaris/cmlogServer \ /nfs/bbr-srv01/u1/babar/cmlog/cmlog.setup source /nfs/bbr-srv01/u1/babar/cproxy/master/ComponentProxy/CP.cshrc NameServer &
Port 1: CEN-MON
Port 2: CEN-BIP
Port 3: IFR-MON
Port 4: EMC-MON
Port 5: EMC-ILK
Port 6: DCH-MON (I think)